my ps2 is not working because it says reading disk over and over whats the best place to get it repaired?

Posts related to what are good electronic repair shops for a ps2?:

2 Responses to “what are good electronic repair shops for a ps2?”

  1. air_force_blue81 writes:

    http://arstechnica. com/articles/paedia/hardware/ps2. ars/1

    Try this. I had the same problem once and this fixed it for me. Basically take apart your PS2 and take off the cover for the laser. Toward the rear of you PS2 their is a little while dial that adjust your laser read level. The article will walk you through it, but one thing that I suggest is that you take a permanent marker and mark the starting position of the dial. First time I fixed mine I didn’t mark it and it took me a lot longer to get the problem fixed.

  2. .skate.for.life. writes:

    Hi,
    If it’s reading the disc over and over, but never plays, and it says “Disc Read Error”, that’s caused by a dirty/dusty laser lense (Which reads the disc).
    Besides taking it to a store to have it fixed, and getting a costly bill, I recommend purchasing a CD Lense Cleaner Disc from Wal-mart, or a local department store, for about $8-$10. They’ll work on CD ROM’s, DVD players, and on Ps2′s also.
    If that still doesn’t work, and the disc read error still is occuring, I suggest you might try the following, if you want to do-it-yourself:
    Remove the cover off your Ps2. Be careful not to pull the case too far from the Ps2 because there is a wire that runs from your on-and-off button, to your internal peices of your Playstation. Once that’s off, then you can remove the cover off the CD ROM drive. Then you can see the laser eye. Take a q-tip, and lightly swab the eye of the laser with alcohol to remove the dust (which is causing the disc read error).
    I hope I’ve helped.


Wanna to reply this "what are good electronic repair shops for a ps2?" post..?