Product DescriptionWant to learn the fundamentals of electronics in a fun, hands-on way? With Make: Electronics, you’ll start working on real projects as soon as you crack open the book. Explore all of the key components and essential principles through a series of fascinating experiments. You’ll build the circuits first, then learn the theory behind them! Build working devices, from simple to complex You’ll start with the basics and then move on to more complicated projects. . . . More >>

MAKE: Electronics: Learning by Discovery

Here the simple LED flasher circuit that you can use for your simple project.

schematic diagram:

component part list:

This electronic schematic diagram is simple, you can use this schematic diagram as your simple electronic project. It’s easy and fun.

The main part of this doorbell circuit are two NE555 timer ICs. When  some one presses switch S1 momentarily ,the loud speaker sounds a bell tone as long as the time period of the monostable multivibrator built around IC1.

When the switch S1 pressed, IC1 is triggered at its pin 2 and output pin 3 goes high for a time period previously set by the values of POT R4 and POT R5.When the output ofIC1 goes high it resets IC2 and it starts to oscillate to make a bell sound through the speaker.The IC2 is configured as an astable multivibrator whose oscillation frequency can be varied with the help of POT R5.By adjusting the values of R4 & R5, modifications on the tone are possible.

This schematic is very simple, there is just need 1 active component in each channel (I mean right channel and left channel). So, there are 2 active components for stereo a stereo audio power amplifier.

The schematic originally come from www.circuit-projects.com

Description:

You’re a newbie in electronics and you need to practice your electronics knowledge and then I suggest you to build this LED Flasher (Flip-Flop). This circuit is very simple and very easy to understand…

INTRODUCTION:

Flashing circuits are very interesting. They grab your attention and can be used in many applications. They consume very little energy and a single cell can last as long as 12 months. This is the simplest circuit capable of alternately flashing two LEDs.

SCHEMATIC DIAGRAM:

COMPONENT LIST: