All about an Electronics Design aid that I build over the past few months. If you’re into electronics and are thinking about building your own project center, then you might find this an interesting video. You can find the display I talk about at: www.allelectronics.com

Electronics Online:'Electronics Project Center – Part 1' was posted under category: Simple Projects. Tags: Center,  electronics,  part,  Project,  You can follow any responses to this Electronics Project Center – Part 1 Electronics Online through the RSS 2.0 feed.

Posts related to Electronics Project Center – Part 1:

17 Responses to “Electronics Project Center – Part 1”

  1. robprebil writes:
    No. 1 — February 2nd, 2010 at 10:25 am

    Very nice – gotta build me one like that. Would cut prototyping time down quite a bit I would think.

  2. THEtechknight writes:
    No. 2 — February 2nd, 2010 at 10:50 am

    the link on the display is now dead :(

  3. tangnatalaga writes:
    No. 3 — February 2nd, 2010 at 11:29 am

    Why didn’t you explain it along with an schematic that way it would be easier to understand.

  4. CassetteMaster writes:
    No. 4 — February 2nd, 2010 at 11:38 am

    That is awesome! You’re real good with electronics!

  5. magidavid writes:
    No. 5 — February 2nd, 2010 at 11:50 am

    Sorry, I’m not familiar with that product.

    What’s the circuit you are working on building?

  6. Scorinitron writes:
    No. 6 — February 2nd, 2010 at 12:22 pm

    Dude do you know anything about Radio shack’s
    300 in One Electronic Project Lab I have one and well I am trying to Complete a project so I can inpress my dad he is an electronic enginnier also your home made project lab is very similer to the 300 in one just bigger

  7. Trusten1984 writes:
    No. 7 — February 2nd, 2010 at 12:33 pm

    I could use lot of expirence !!!

  8. davidbball13 writes:
    No. 8 — February 2nd, 2010 at 12:44 pm

    you can make it a lot lot smaller with just a 555 for a clock and a 4026 decade and decoder to count them

  9. patrickikis writes:
    No. 9 — February 2nd, 2010 at 1:11 pm

    Yeah, I actually much prefer wire-wrapping, but in this case, it was a pain in the ass because I wasn’t actually wire wrapping, but rather using wire-wrap wire to make solder connections from the bottom of the PCB, which was very small. It was so brittle that I used hot glue on the solder side of the PCB, and made any necessary changes to errors by making new connections from the top.

  10. magidavid writes:
    No. 10 — February 2nd, 2010 at 1:15 pm

    Cool, got a video about it?

    Radio Shack is a good source for PC boards at a reasonable price. Though, some of the nicer ones they stopped making years ago. Now, only the most popular ones are manufactured.

    Wire-wrapping has its advantages, but if you have a lot of connections, tracking down a problem can be a nightmare! :D

  11. patrickikis writes:
    No. 11 — February 2nd, 2010 at 1:54 pm

    I like your counter circuit. I had to make one to interface with my controller board, but I only have a 2-inch by 1. 5-inch PCB. I don’t have the patience to wait for the proper materials if I can improvise. I had to make every solder connection from the bottom of the PCB using wire-wrap wire. I literally had to use hot glue to make sure no connections broke, as the wire wrap wire is easily broken. Long story short, smallest TTL 2-decimal counter ever! Great video!

  12. magidavid writes:
    No. 12 — February 2nd, 2010 at 2:25 pm

    Get a beginner’s book and start there. Just about everything you need in the beginning can be found at Radio Shack.

  13. nockturnal13 writes:
    No. 13 — February 2nd, 2010 at 3:23 pm

    what book or books do you reccomend to start out with ? im as beginner as a beginner can get but fascinated about this stuff

  14. magidavid writes:
    No. 14 — February 2nd, 2010 at 3:23 pm

    Get a book on the basics and start reading. You can pick up almost everything you need from Radio Shack to start experimenting. Or, if you have the option, take a class.

  15. davzik0 writes:
    No. 15 — February 2nd, 2010 at 4:08 pm

    Where do you recommend i start to lean electronics? Really would love to understand all the stuff you say lol

  16. magidavid writes:
    No. 16 — February 2nd, 2010 at 4:39 pm

    You’re welcome, I just hope this was useful to you. :)

  17. waynedavisband writes:
    No. 17 — February 2nd, 2010 at 4:50 pm

    great work I have been trying to learn electronics on my own for some time now and have finaly started using 555 timer circuits and npn and pnp transistors as well as other basic circuit components thanks for the vids keep em coming


Wanna to reply this "Electronics Project Center – Part 1" post..?

«
»